Fibre cement
Contents |
[edit] Introduction
Fibre cement is a composite building material first developed in the early-1980s as an asbestos-free cement-based construction product. It is used predominantly in roofing and façade products because of its strength and durability.
Fibre cement products are a mixture of:
- Natural and synthetic fibres.
- Portland Cement.
- Sand.
- Water.
- Small amounts of chemical additives to provide particular characteristics.
Some of the advantages of fibre cement include:
- Resistance to rust, rot and chemical attack.
- Vapour permeability, which reduces the risk of condensation.
- Durability.
- Excellent thermal and noise insulation properties.
- Good weather-proofing properties.
[edit] Fibre cement sheeting
Fibre cement corrugated sheets can be used for a wide range of situations, but are most common in:
- Industrial warehouses.
- Agricultural warehouse and farms.
- Stables.
- Domestic buildings and garages.
Marley Eternit, the UK’s largest manufacturer of fibre cement products, produces AS6 and AS3 profile sheets, differentiated by the size of the corrugation in the sheets. The AS3 profile has smaller corrugations than the AS6 profile. AS6 is designed for roofs with a pitch of 5-degrees, and for vertical cladding in both single skin and insulated constructions. AS3 is more suitable for small structures such as housing, general purpose sheds, and garages.
Correct fixing of the sheets is vital to avoid the risk of premature failure, corrosion or leaks. Sheets should be installed according as follows:
- The smooth surface should face upwards.
- Sheets should be cut using a hand saw or slow speed power saw.
- Fixing holes should be drilled not punched.
- Factors influencing the roof fixing, such as the purlin or rail type and the nature of the roof in question, should be carefully considered.
[edit] Fibre cement slates
A fibre cement slate is a lightweight roof tile, particularly suited to complex roof geometries, which can also be used for vertical hanging. The surface and square edge are designed to closely resemble natural slate, and have the advantage of being easier and faster to install. In addition, they can be installed on roof pitches as low as 15°.
[edit] Related articles on Designing Buildings Wiki
Featured articles and news
Investors in People: CIOB achieves gold
Reflecting a commitment to employees and members.
Scratching beneath the surface; a guide to selection.
ECA 2024 Apprentice of the Year Award
Entries open for submission until May 31.
UK gov apprenticeship funding from April 2024
Brief summary the policy paper updated in March.
For the World Autism Awareness Month of April.
70+ experts appointed to public sector fire safety framework
The Fire Safety (FS2) Framework from LHC Procurement.
Project and programme management codes of practice
CIOB publications for built environment professionals.
The ECA Industry Awards 2024 now open !
Recognising the best in the electrotechnical industry.
Sustainable development concepts decade by decade.
The regenerative structural engineer
A call for design that will repair the natural world.
Buildings that mimic the restorative aspects found in nature.
CIAT publishes Principal Designer Competency Framework
For those considering applying for registration as a PD.
BSRIA Building Reg's guidance: The second staircase
An overview focusing on aspects which most affect the building services industry.
Design codes and pattern books
Harmonious proportions and golden sections.
Introducing or next Guest Editor Arun Baybars
Practising architect and design panel review member.
Quick summary by size, shape, test, material, use or bonding..